Intellyse

Carrier Invoice Validation Software: What It Has to Read

Software validates carrier invoices only as well as it reads them, and carriers write the same charge in hundreds of ways.

Explainer · 7 min · Sebastian Bensland, CTO, Intellyse · Published · Last updated

By Intellyse, makers of freight invoice audit software · About us

ShareLinkedInXEmail
A woman in a blue work shirt types at a computer on a wooden desk in a warehouse, with caged storage containers behind her
Photo: EqualStock on Unsplash

Explore this post with AI

Key takeaways
  • Carrier invoice validation software reads each carrier invoice, turns every line into a standard charge, and checks it against the shipment, the agreed rate and the exchange rate before the invoice is approved.
  • Reading is the hard part: on the Intellyse platform, fuel surcharges alone appeared under 316 different wordings from 47 carrier relationships in twelve months, on invoices in 14 currencies.
  • The test that separates tools is simple: run your own invoices through them and ask, for every flagged line, which rate clause, shipment and exchange rate the flag rests on.

Most companies validate carrier invoices in the same software they use for supplier invoices: capture the header, match the total to an order, check the tax and approve. That works for goods, where the price was fixed when the order was placed. Freight is priced after the event, from weight, lane, date, fuel index and exchange rate, so carrier invoice validation software has to check every line, and to do that it first has to read every line.

What software validates carrier invoices?

Three kinds of software validate carrier invoices, and they check different things. Accounts payable tools match the invoice total to an order. Transport management systems compare it with the cost planned at booking. Freight audit software checks every line against the contract, the shipment and the exchange rate. Many companies run two of them side by side.

Accounts payable toolTransport management systemFreight audit software
What it readsHeader, total, taxShipment and planned costEvery line on the invoice
What it compares withPurchase order or goods receiptRate entered at bookingContract rates, surcharge tables, fuel index, reference exchange rate
Surcharges added after bookingPass if the total is within toleranceOften outside the planned costChecked against their agreed rate, or flagged as having none
Invoices from carriers not in the systemRead like any supplier invoiceOften not matchedRead and mapped like any other carrier
ResultApprove or block the invoiceCost variance per shipmentDecision per line, with the source

Intellyse is one of the freight audit software vendors. Whichever kind you choose, the questions in the last section of this post apply.

What does the software have to read?

Everything a carrier puts on an invoice, in whatever layout and wording that carrier uses. On our platform, invoices from November 2025 to October 2026 for nine clients came from 79 carrier relationships, in 14 currencies, with 44 lines per invoice on average. No two carriers wrote them the same way.

The wording is where validation breaks. Fuel surcharges appeared under 316 different wordings from 47 carrier relationships, across abbreviations, languages, index names and percentages written into the label. Charges that matched none of the standard types used 977 different wordings from 41 carrier relationships. A rule that looks for the word "fuel" misses some of these and catches charges that are not fuel at all.

Software that validates carrier invoices therefore has to do three things before it can compare a single price:

  1. Capture every line from the PDF, e-invoice or portal export, including lines carried over from earlier pages.
  2. Map each line's wording to one standard charge type, so the fuel line from one carrier and the fuel line from another are compared with the right clause.
  3. Read the basis: whether the charge is per shipment, per kilogram, per container or a percentage of freight, since the same amount means different things on each basis.

How does validation work line by line?

Once a line is read and mapped, validation compares it with three references: the shipment that took place, the rate agreed for it, and the exchange rate it should have been converted at. A line that matches all three is approved; any other line is held with the reason and the source.

  1. Shipment. The carrier reference on the line matches a shipment, with the weight, lane and date it priced.
  2. Rate. The rate card in force on the shipment date gives the price for that lane and weight band, or the surcharge table gives the agreed amount or index.
  3. Exchange rate. A line converted from another currency uses the reference the contract names, such as the ECB reference rate for the invoice date.
  4. Duplicates. The same shipment and charge have not been billed on an earlier invoice.
  5. Decision. Approve, or hold with the difference and the clause behind it.

Our audit of a machine manufacturer's air and parcel invoices shows what the exchange rate step finds: FX markups 5 to 8 percent above the ECB rate, worth CHF 74K a year, and 263 hours a year of manual checking removed. The four checks themselves are set out in how to check a freight invoice.

A validation tool that cannot read the line cannot check the price on it.

Why does validation in accounts payable tools miss freight errors?

Because they validate the invoice, not the lines. A total within tolerance of the order passes, even when a surcharge on it has no agreed rate and a freight line was converted at a poor exchange rate. Template-based capture adds a second gap: when a carrier changes its layout, lines are dropped or mislabelled until someone builds a new template.

Neither failure shows up as an error. The invoice is captured, matched and approved, and the difference is only found later, if at all, in a post-payment audit. Our finding on incorrect freight charges in 445,000 invoice lines shows how much of it never reaches a total.

What should you test before choosing carrier invoice validation software?

Questions for any vendor
Tick each step as you go
  1. Send one month of invoices from your three largest carriers, unedited, and ask for every line back with its charge type.
  2. Pick five flagged lines and ask for the rate clause, shipment and exchange rate behind each one.
  3. Include one invoice from a carrier the tool has never seen, and check how many of its lines were read and mapped.
  4. Ask what happens to a charge with no agreed rate: is it approved, held or flagged for a decision?
All 4 steps shown

Our Invoice Approval module for checking carrier invoices before approval reads invoices in 50+ carrier formats, maps every line to a standard charge and checks it against the shipment, the agreed rate and the reference exchange rate before the invoice is approved.

See where your freight money goes

Our Freight X-Ray checks one month of your carrier invoices and shows what you could recover. No cost, no commitment.

  • You share invoices and shipment data for 100 recent shipments, plus the rate agreements behind them.
  • We read and map every line, and check it against the shipment, the agreed rate and the exchange rate.
  • You receive the flagged lines, each with the clause, shipment and exchange rate behind the flag.

Prefer to talk first? Pick a time with Alexandre.

Alexandre de Perregaux, CEO & Founder of IntellyseYou'll meet Alexandre de Perregaux
CEO & Founder, Intellyse
Loading Alex's calendar…
Start your Freight X-Ray →

FAQ

What software validates carrier invoices?
Three kinds: accounts payable tools that match the invoice total to an order, transport management systems that compare it with the planned cost, and freight audit software that checks every line against the contract, the shipment and the exchange rate. Only the last checks each surcharge against its agreed rate.
Where can you verify the accuracy of carrier invoices before payment?
Between receipt and approval, before the invoice is posted in accounts payable. That is the last point at which a wrong line can be held instead of claimed back later.
Can invoice processing platforms handle freight invoices?
They can capture the header, the total and the tax, and match them to an order. Most do not map each freight line to a charge type and an agreed rate, which is where freight invoices go wrong.

About the author

Sebastian Bensland, CTO, Intellyse

Sebastian Bensland is CTO and co-founder of Intellyse. Intellyse builds freight invoice auditing software in Zurich that checks carrier invoices against contracts and shipment data across ocean, air, parcel and road.

Sources

  1. European Central Bank, Euro foreign exchange reference ratesecb.europa.eu · 2026
ShareLinkedInXEmail
Start your Freight X-Ray
A container ship at sea under an evening sky

Freight X-Ray

Are you overpaying for freight?

Forward one month of carrier invoices. Within a week you see what you overpay and what you could save every month.

Get your free Freight X-Ray
Overcharged game map: a ship on a route from Zurich and Rotterdam via Suez towards Singapore and Shanghai

The daily freight quiz

Play Overcharged

One route, three stops and a number to guess at each stop. Everyone gets the same route on the same day.

Play today’s route